Pavlograd Machine Tool Plant
Providing machine tools
We are
looking for partners for:
1)
distribution
2)
joint operations (investment)
Screw-cutting lathe
16B16KPM |
Used for center and chuck turning; metric, inch and
pitch threading. Good structural design, wide range of spindle
revolutions and saddle feeds, and easy maintenance contribute to the
high operational qualities of the lathe. |
Coiling machine SHA
820P |
Used to produce no-core steel wire up to 1,000 kg in weight, 450 mm in
diameter. Constant tension effort and coil pitch are maintained as
the coil diameter changes. There are five modifications of the
machine to work with wire of different diameter. |
Concrete mixers BSP-500, BSP-1500 |
Used to produce concrete mixes and mortars of any
flowability. Can be operated both as a single unit and as part of
the modular equipment of automated concrete mixing workshops, as
well as in concrete mixing units at prefabricated concrete
facilities of construction companies. Internal surfaces are armored. |
|
Semi-automated milling rock-cutting machine PFK-400
|
Used to cross-cut rock slabs up to 400 mm wide, obtained by sawing natural and artificial rock (granite, marble, limestone, tufa, etc.) The machine is produced in two modifications with different engine capacity. Each modification can have left- or right-side orientation. |
|
Orthogonal multi-disk sawing machine COMP-1250
|
Used to saw rock blocks. Operates on the principle of
orthogonal cutting the rock block with several disk saws installed
on the vertical and horizontal spindles. The vertical spindle has
one side-facing saw. The horizontal spindle has one or several saw
disks of large diameter. The machine is produced in two
modifications. |
